Cable Management On Rig
=======================
As I do not like cable ties to be spread overall, I started to get a clean cable
management on the rig itself. For this reason I started to print cable channels,
which are attached to the dovetails. The advantage is if you need to remove a wire
you just could do it without any tools.

So I started removing all the cable ties from my rig. PartI.

.. image:: image/img_9575.png
    :align: center
    :scale: 71%

Part II.

.. image:: image/img_9576.png
    :align: center
    :scale: 71%

And the printed channels attached to the dovetail.

.. image:: image/img_9577.png
    :align: center
    :scale: 71%

I also did some clips to attach two cable to each other.

.. image:: image/img_9578.png
    :align: center
    :scale: 71%

Detailed view on the left side where the connections for focuser and ccd (USB and
power) are alinged to each other.

.. image:: image/img_9579.png
    :align: center
    :scale: 71%

The two lines which direct to the focuser on the right side.

.. image:: image/img_9580.png
    :align: center
    :scale: 71%

Passing the Pegasus UPB below with Power for Dew and the USB for the camera (which
is attache to the front of the Mini PC (USB3). Part I

.. image:: image/img_9581.png
    :align: center
    :scale: 71%

Part II

.. image:: image/img_9582.png
    :align: center
    :scale: 71%